Repack Trailer Wheel Bearings With This
Affordable Top Rated Ocala FL Company
Looking for help repacking your
trailer wheel bearings? If you
answered 'yes', then this company
is for you! R&B Hitch of Ocala has
launched its trailer wheel bearings
repacking service.
The company offers
replacement of trailer wheel
bearings to prevent trailer
breakdowns.
The newly launched service by
R&B Hitch is an import breakdown
prevention measure since wheel
bearings should be replaced every
year or every six months if the
trailer is used frequently.
Without replacking them, it
could result in being
stranded somewhere.
The first step R&B Hitch will take is
to remove the outer bearing and
support the frame or axles with jack
stands. Then the wheel is removed
along with the hub dust cap by
using slip-joint pliers.
Next, staff will unbend the cotter pin and
grab the head with side cutters and
leverage it out of the castle nut. The next
step taken is to spin the nut off with
pliers. Then the hub is pulled forward
until the washer and outer bearing fall
out.
Removing the inner bearing is
the next action carried out by
first pulling the entire hub off
the axle and placing it on the
floor.
Staff will then use their feet
to hold it and pry out the
grease seal with the seal
puller.
The next step staff will take is to
clean the bearings by soaking
them in the degreaser and
using the parts brush to clean
out all the old grease and dirt.
Then the bearings will be set on a
clean cloth to dry, or compressed
air will be used on them. But don’t
spin them with compressed air –
they can fly apart and cause
serious injuries.
Go to
rbhitchofocala.com/trailer-
wheel-bearing-repack-and-
lube-2 for more info!